tattoo leters

images amor vincit omnia chest tattoo

leter ghreek tattoo letering

pbojja

04-20 02:22 PM

I-94 also does not have the date written

Just take the passports and required documents to Chicago Airport , there will be a Customs and Border office inside the International terminal, they will be able to fix it .

---

wallpaper leter ghreek tattoo letering

foot and ankle tattoos.

pkv

01-07 09:51 PM

I would like to know the answer to this question too. does anybody know?

also pkv..how many days did it take you to get the new passport?

I got it in a week, I got it from SF Consulate.

---

Name tattoos, some Tattoo

ocpmachine

06-17 12:26 PM

Thanks yganreddy for your input. It might help.

In my case, the X Ray shows nothing - so I am all clear on that.

My concern is I don't how big the thing became after the test was done (twice). Once in 1997 when I first came from India and next in 1998 (when i worked in NY Preysbeterian Hosptal and they mandatorily tested for TB via skin test). I have asked for the reports from NY hospital and am hoping that it is less than 10 mm as the civil surgeon says that if the size is bigger than 10 mm, I will have to go through the treatment for TB (even though i have no evidence of active TB). I hope he is wrong.

I had another question. Can I get the reports from India, when i got the TB test done? I might have the papers at home and will have to search for it or does USCIS not consider the papers from India? I hear a sealed envelope is what is needed from a doctor. In that case, we might be able to try to get in touch with the doctor that did the test and ask for a sealed envelope (showing him the papers he gave us when we got the test done).


EB3June03,

Its upto the doctor's discretion to accept an old TB skin test(PPD), my doctor did not consider the old test results, she recommended taking a new PPD test as the test is a snapshot test which indicates the state as of the time of the test and you might be infected with TB since the last test.

Also, there is a new test as mentioned earlier called Quantiferone-Gold test (QFT-G) which provides better test of TB. However, this test is NOT certified by USCIS.

Just for clearing the doubt, you can take QFT_G test, if QFT-G result is +ve then you need to undergo treatment, if x-ray is clean and QFT result �ve you are clear of TB. My QFT-G came back as �ve and clean X-ray, however my 693 form was marked �Class B Latent� due to PPD result > 10mm, I am not taking treatment due to �ve QFT but keeping all the paperwork to respond in case of future RFE.

Disclaimer: I am not a Doctor/Lawyer.

---

2011 foot and ankle tattoos.

uv ink tattoo uv ink tattoo

pd_recapturing

08-22 04:13 PM

"Fragomen, Del Rey, Bernsen and Loewy, LLP" are doing my H1-B transfer and I had a good experience dealing with them so far (though brief).

Only thing is for GC I am little reluctant due to their PERM cases being the traget of audit
Why do u need them for gc ? Your 485 is already pending.

---

more...

quotes and sayings tattoos.

knowDOL

05-19 10:26 AM

One more thing, never disclose anything with company's attorney, they will be loyal to your employer and not you. Look for soem other attorney.

---

hot tattoo tribal and tattoo

peer123

04-09 11:15 AM

Friends,
I am working for company A and I have offer from Company B, I thinking of my options, Here is my situation

1. I have approved I140 > 180 days in actually 300 days

2. I have approved EAD

3. mine is labor transfer case and I used an existing labor that matched my job profile

4. Company B is ready to hire me in the same/similar role and are ready to give AC21 employment letter with same details as in my labor.

5. I have approved copy of my labor that was transferred and all other copies related to my case like I140, I485 application and Advance parole etc,....


Please give me some guidance on if I should be accepting the offer from Company B, I am concerned because my labor was transferred from another employee. I have worked for company A for nearly 4 years now and my GC is in process for almost 4 years, labor switch was done like 2 years ago.

Based on this explanation do you see any risk and am I missing anything here, in terms of getting specific documentation from company A application..

please help
bumping it up... - please provide your input

---

more...

unique tattoo design

thomachan72

05-10 09:42 AM

I am curious to know if people are sending amounts >20K by wire transfer to India or other countries from the US. People who do that regularly or have done that in past, have you encountered any problems? Wire transfers are directly informed by the bank to the IRS and you do not have to do it personally right?
Comments from those who have done this before is appreciated.

---

2010 Name tattoos, some Tattoo

amor vincit omnia chest tattoo

gcsucks

06-01 02:58 PM

ya so if i can atleast file my 485 i can be relieved that i will not have to leave the country ! Everybody has the same problem buddy

---

more...

flower tattoo with stars.

sanju_eb3

02-26 09:33 AM

If I were you, I would take start with something "less technical" in the IT field like testing. You can learn a tool or two (example: Mercury, Rational etc) and basic methodology about planning, executing and monitoring testing. You have your background in HR and can use your functional skills to add value to any HR enterprise implementation.

You can then move to more technical side of the IT fields with configuration of any of the major enterprise tools like others have suggested - Peoplesoft, SAP etc.

---

hair uv ink tattoo uv ink tattoo

tattoo flash set tattoo flash

leo2606

04-12 02:20 PM

A person I know of did not get paid for about 2 years but this guy went to India for stamping in Delhi.He filed a law suite against his employer before he leaves. He showed all the documents related with the case when asked and got his visa.So I am thinking your reply will not jeopardize your H1B.You have evidence that you moved of this company and filed H1- B transfer knowing the company is bad.

Again you definetly need to consult an attorney like Murthy or Khanna to talk about this.I think you can get immediate consultation if you call their office, obviously they charge.I think it is worth spending so that you will not have mental tension.

---

more...

tattoo quotes for girls.

yabadaba

07-21 08:52 AM

This idea was floated a few years back, but then we did not have the win of a flower campaign behind us.

We now have a senator to focus our energies on - Dick Durbin.

How about everybody with a US degree send a copy of the diploma in a packet to Sen Durbin with a message - Dont hold us hostage because of a few bad apples..something to that nature?

Alternatively we can send it to Sen Obama asking him to please let the senior senator from illinois, sen Durbin, know we are high skilled immigrants - dont hold us hostage because of a few bad apples.

maybe we can send an apple too :D

sending to sen obama will make sure the issue is played in media because of the presidential coverage.

---

hot quotes and sayings tattoos.

2011 Morton Salt Girl Tattoo

ramus

06-11 12:16 PM

Seems to me you joined IV for then a year now..
Can I ask you simple question.

What is your contribution towards IV.

Contribution could be in any form-- fund/invite friends/send email to reporters/ and so on..

Please answer here to we all will know.

Mr. Sanju,

We are all aware of what going on at the Senate floor and also about the ammendments that put forth on the floor. So my question is clear anc simple what ammendment is supported by CORE IV and what are we looking for.
Because the passing of the current version of the bill will effect all the old cases which many people are in and I wont allow that to happen. I will try my best to avoid this situation to happen. Even though i have a MAster in engineering I will not support SKIL progran that will void the previously pending cases. Good try core IV yto make member to work towards the betterment of few people You know what such people are called" SELFFISH". Guys beware on whaT ACTIONS YOU ARE DOING SO THAT YOU WONT REPENT.

---

more...

house Unique Bird Tattoo Design

2010 heart tattoos for women.

GotGC??

05-15 11:50 AM

Here's a rather strange and may be uncommon situation for someone I know who needs suggestions from gurus here...such huge PD movements do result in strange situations such as these :)

EB3 India Labor + I-140 certified with PD Feb 2003
EB2-140 pending at NSC hoping to port the EB3 PD date

So both cases are now current, which leads to a couple of options for AOS:

1. File based on approved EB3 (and risk a potential retrogression in future)

2. File based on pending EB2 140 before it is approved (and risk potential RFE, etc. and who knows if it would be too late to revert to the EB3)

The other option is to upgrade the EB2 140 to PP, but could you please list the relative merits of the above two options?

---

tattoo hot tattoo tribal and tattoo

small cherry tree tattoos.

waiting4gc

07-17 06:46 PM

Your spouse was in US when your application reached USCIS so you should be fine.

Am I in the same situation? My spouse left US today to INDIA. However we filled the 485 on July 2nd. Will they consider that as abandonment of the application?

---

more...

pictures unique tattoo design

Buddha Tattoo Art Full Colour.

another one

08-10 02:55 PM

signed up for $100 pm last week..

---

dresses 2011 Morton Salt Girl Tattoo

tattoo cover up design letter

mayhemt

08-30 12:02 PM

Not illegal if you are also present in the recording.

- son of a lawyer... not a lawyer myself.

hopefulgc is right.....laws vary by each state, but basic rule comes down to atleast one party on both ends consenting for recording. In this case, you have consented yourself for recording & recorded it. Also only if want to make it public this rule applies, If you are recording for your own reference it doesn't apply (disclaimer: consult a professional lawyer...)

Even I faced a similar situation with my manager (of course a desi). He would promise some things (like promotions) & the end of the year he would completely deny any promising like that. So I used my cellphone (most of the cellphones come with a voice recorder feature these days). Whenever he would take me for one-to-one review meetings, i would simply activate the voice record shortcut & keep my cellphone in my upper left pocket; later I when I played I laugh out loud for hours & hours for all the smooth bullshit he talks. Of course I never went public with them, kind of keeping them as secret weapon.

---

more...

makeup flower tattoo with stars.

Unique Bird Tattoo Design

simple1

07-26 04:24 AM

In India 3 year grad are arts, humanities, science, management and accounting.
while 4+ year degrees are for technology, engineering, agriculture, medicine.

UK (some parts of europe as well) and Australia seems to have similar system in some of its university.

even some US universities have rightly adopted the same
fsu.edu | degree in 3 (http://www.degreein3.fsu.edu/)
Degree in Three Program Description (http://www.ecu.edu/threeyeardegree/)
Panola College Degree in 3 Program (http://legacy.panola.edu/instruction/degree_3/index.html)
The point is the content is more important than the duration.

I personally think 3year UG unlikely reason for reopening I140 after GC is approved. I would be shocked if that is the case.

I am afraid this could be a paper chase. Asking more docs to creating headache for the applicant.
U.S. steps up H-1B, green card assault with paper chase (http://www.computerworld.com/s/article/9135552/U.S._steps_up_H_1B_green_card_assault_with_paper_c hase)

It is better to consult attorney to handle it properly.


In my case, it was B.Sc + M.C.A (3 + 3) years education and applied it on EB2 Category. I know of a lot of cases with M.C.A approved on EB2 category. So, I am not sure if this would be reason for it.

---

girlfriend small cherry tree tattoos.

quote tattoo

ocpmachine

06-10 03:08 PM

Help!

Took TST last week, positive (16mm), X-ray negative, civil surgeon marked "Class B, Latent TB Infection" on I-693, and gave me a notes saying that since May 2008, TST>10 will be marked with LTBI, and advised me to go to Health Department.

Same as many of you guys, had taken vaccines when young. Have been in US for 11 years. Pretty sure I don't have TB. What should I do? Does LTBI affect 485 approval? How about AP/EAD? Will USCIS ask for evidence of TB treatment?

Thank you very much!

We just got our medical envelope for me and my wife from the doctor, we both had TST reaction of 10mm and 18mm, chest x-ray came out normal...doctor marked both of us Latent Class TB(LTB1)...i would not worry about this, Latent TB is not infectous and recommended(not required) to undergo treatment. I am going to sit tight, not taking any medication as i heard the medication is a strong antibiotic which has more side effects(esp in women) and does more damage(to liver) than cure. If on medication, you are also required to take a test every 2 months to check if your liver can take medications for following months. Ofcourse, even after taking medication for 9 months, you cannot guarantee future TST test will result -ve due to BCG vaccine history.

If i get an RFE at a later time, i will goto my PCP, start medication(which i will discard) and get a letter saying in am on medication just for paper work sake, i refuse to take the medicine when x-ray is clear.

Read here:
http://www.cdc.gov/ncidod/dq/civil_tb_ti_2008.htm

Here is the snippet from CDC.gov for TB:

16. What is Class B�Latent TB Infection Needing Evaluation for Treatment (LTBI)?
A TST reaction of 10 mm or more of induration, and a history of recent arrival (within the last 5 years) in the United States from a high-prevalence country.
And
No evidence of active TB disease.

17. Should Part 3 of Form I-693 be completed when the civil surgeon is referring the applicant for evaluation for treatment of Latent TB Infection (LTBI)?
The 2008 TB TIs recommend that civil surgeons refer applicants with �Class B�Latent TB Infection Needing Evaluation for Treatment (LTBI)� to the TB Control Program of the local health department. The referral for evaluation for treatment of LTBI is recommended, not required. Part 3 of Form I-693 should be used only for required referrals, therefore the civil surgeon should not complete Part 3 of Form I-693 when making this referral. It follows that the health department is not required to complete Part 4 of Form I-693 after evaluation for treatment of LTBI is completed or after treatment for LTBI is completed. Please see question 18 for related information.

21. Can the civil surgeon medically clear the applicant for TB even if the applicant is going to receive treatment for latent TB Infection (LTBI)?
Yes. Referral for treatment and/or completion of treatment for LTBI is not required for the civil surgeon to sign the I-693 form. As regards TB, the signature indicates the applicant is free of Class A pulmonary TB disease.

Disclaimer: I am not a doctor or an attorney, Please consult doctor or an attorney for expert advice.

---

hairstyles tattoo quotes for girls.

Best Unique Face Tattoo

rajeevkaza

10-30 09:33 PM

Hi,

I understand ur problem, let us fix one by one, Ideally you are supposed to apply ur H1B atleast before 1 month, at the same time you can apply ur H1B extension within 45 days after expiry date with a genuine reason. As your Attorney to show proof and have him apply for H1B. Once you receive your receipt number you are still on H1B, if there is a way try to get it done in premium process.
Now coming to using EAD, once you start using it, as far as my little knowledge goes you should not come back to H1B.

Good Luck.

---

smileyslimey

11-30 08:59 AM

Hi,

My current H1 expires in Nov 2007 and I am working in the oil and gas field. I am also pursuing an MBA which will end in mid-2008. My current employers have started the PERM process and hopefully I will have an approved I-140 by mid 2007, so that I can get renewals at that time.

The question is that if I want to shift to another industry, say consulting or supply chain management, after my MBA is over, can I get a new H1 from my would-be employers? That is while I am on my current I-140 renewal with an oil and gas job description? I will have exceeded my 6yrs by then, anyway.

Any advice will be appreciated.
Thanks.
Regards.

---

irfankhan25

04-06 04:33 AM

You can import PDF-compatible Adobe Illustrator files (.ai) directly into an open document in your Microsoft Expression Blend project.
When you import an Illustrator file into Expression Blend, Illustrator layers, groups, and objects are converted to Expression Blend containers and objects with associated properties. Understanding how Illustrator objects are imported into Expression Blend will help you integrate Illustrator files into your Expression Blend projects more quickly and efficiently.

When you save your file in Illustrator, make sure that the Create PDF Compatible File check box is selected in the Illustrator Options dialog box. Otherwise, you will not be able to import your Illustrator files into Expression Blend.
http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_CreatePDFCompatibleFile.png)
To import an Illustrator file



Open the document into which you want to import the .ai file.
On the File menu, click Import Adobe Illustrator File.
In the Import Adobe Illustrator File dialog box, locate the Illustrator file that you want to import, and click Open.
Click OK.
A new Canvas object with the same name as your imported file is added to your document. In the Objects and Timeline panel, under the Canvas object (named AvatarSymbols in this example), are all of the Illustrator objects imported as Expression Blend objects. If images are imported as a part of your .ai file, a new folder (named AvatarSymbols_Images in this example) is created in the root folder in the Projects panel to contain all the converted image files.
Note: If there are no images associated with your project, a folder will not be created in the Projects panel.
http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png (http://expressioniq.com/wp-content/uploads/2011/02/b5_ImportIllustratorFile.png)
You can also create a custom folder in the Project folder for any images that are associated with your .ai file.
To create a custom images folder



In the Projects panel, right-click the .csproj file, and then click Add New Folder.
Type a name for the new folder in the folder name box.
With the folder selected in the Projects panel, import the Illustrator file by following the steps in the preceding procedure entitled “To import an Illustrator file.”
Layers, groups, and objects

Expression Blend imports Illustrator layers and groups as nested XAML Canvas objects containing paths and images. Nested Canvas objects are used as layout containers to make them easier to work with in Expression Blend. The following information will help you understand how to work with Illustrator files after they are imported.
Layer names

Layer names are preserved for the top-level groups (Avatars in the preceding image). After you import your Illustrator file into Expression Blend, you can change the name by right-clicking the object in the Objects and Timeline panel and then clicking Rename, or by double-clicking the object name and then typing directly in the object name field.
File structure and groups

Illustrator groups do not exist in PDF-compatible files, so are not imported into Expression Blend. However, the objects contained within an Illustrator group are imported as individual objects with the same positioning as in the Illustrator group.
Object types

Images are imported as PNG files and are added to an images folder in the Project panel, and added as Image objects in the Objects and Timeline panel. Text and vector objects are imported as editable paths and appear in the Objects and Timeline panel.
Visibility and lock

Visibility settings for Illustrator layers imported into Expression Blend are preserved. However, only visible objects within layers are imported. You can change which objects are imported into Expression Blend by changing the visibility settings of the objects within each layer in Illustrator.
Lock settings are ignored.
Editable content

If the imported content is editable, you can modify the appearance of the content in Expression Blend by modifying the object properties. The following table describes Illustrator elements that are editable in Expression Blend. Use the Description column to locate the properties for the object in order to modify them in Expression Blend.
Illustrator element Expression Blend element (XAML) Description Group Canvas Illustrator groups are ignored. However, the content of the group is imported as individual objects in the Objects and Timeline panel. Text (type objects) Canvas An Illustrator type object is imported as a Canvas object named TextBlock with the original Illustrator text imported as Path objects. Text styles are imported as separate Path objects. For example, a 5-letter word with a Strikethrough style applied is imported as a Canvas object containing 6 paths, one path for each letter of the word, and an additional path for the Strikethrough style.
Stroke Path An Illustrator stroke is imported as a path with the Stroke properties mapped to the Stroke brush in the Properties panel in Expression Blend. Solid color fill Path An Illustrator solid color fill is imported as a Path with the original Fill property mapped to Expression Blend Color properties applied to a Solid color brush. Solid color brush properties are located in the Brush category of the Properties panel.
Linear gradient fill Path An Illustrator linear gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Linear gradient brush properties applied to a Gradient brush. Linear gradient brush properties are located in the Brush category of the Properties panel.
Radial gradient fill Path An Illustrator radial gradient fill is imported as a Path with the original Fill property mapped to Expression Blend Radial gradient brush properties applied to a Gradient brush. Radial gradient brush properties are located in the Brush category of the Properties panel.
Image layer Image An image object in Illustrator is imported as an Image object in Expression Blend. In addition, a PNG file is added to the project. The PNG file is the source for the Image object. Custom fill OpacityMask applied to an ImageBrush Illustrator supports multiple fills for an individual object. If an additional fill is applied to an object in Illustrator, and that fill contains an alpha channel, the fill is imported as an OpacityMask applied to an ImageBrush. For best results, use only one fill acting as an opacity mask in your Illustrator file. OpacityMask properties are located in the Brushes category in the Properties panel. In addition, a PNG file is added to the project. The PNG file is the source for the ImageBrush.
Note: You can verify whether or not multiple fills has been applied to an object by viewing the object properties in the Appearance panel in Illustrator.
Clipping mask Clip property An Illustrator clipping mask is imported as a Clip property. Clip properties are located in the Miscellaneous category in the Properties panel.
Note: The Clip property has limited support in Windows Phone projects.
Illustrator feature support in Expression Blend

The following Illustrator features are supported in Expression Blend. Where noted, features can be edited in Expression Blend.
Note: Although Expression Blend supports the following Illustrator features, for best results, create your Illustrator file using only vector art.
Text

Text layers imported from Illustrator are converted to a canvas, and each character is a separate path object that is a child of the canvas. The appearance of the text is maintained, but is no longer editable as text after it is imported.
If a single text layer in Illustrator contains hard returns, the text associated with each paragraph break will be imported as a separate canvas object when imported into Expression Blend.
Note: You may experience unexpected results when you import text from Illustrator. These results can include unexpected character rotation, kerning, point sizes, and alignment.
Text styles

The following Illustrator text effects create individual paths when imported into Expression Blend.


Subscript
Superscript
StrikeThrough
Underline
SmallCaps
AllCaps
Effects

Effects are supported, but not editable, in Expression Blend. Effects are rasterized and imported as Image objects. A PNG file is used as the source for the image object, and is located in the folder that is created in the Project panel.
Gradients

Expression Blend supports the importing and editing of linear and radial gradients. Color stops are imported as gradient brushes to the Fill property of the resulting object in Expression Blend, and opacity stops are imported as gradient brushes to the OpacityMask property.
Strokes

Custom strokes are imported as individual paths.
When you save an Illustrator file in PDF-compatible format, strokes and fills are saved as separate paths. When you import a PDF-compatible file into Expression Blend, a stroke and a fill on the same object may also be imported as separate objects. However, if the stroke and the fill are identical, the stroke and the fill may be merged into a single object when imported into Expression Blend.
Tags: Adobe Illustrator (http://expressioniq.com/?tag=adobe-illustrator), graphics (http://expressioniq.com/?tag=graphics), images (http://expressioniq.com/?tag=images)

This entry was posted on Friday, March 4th, 2011 at 12:54 pm and is filed under Expression Blend (http://expressioniq.com/?cat=7), SketchFlow (http://expressioniq.com/?cat=11). You can follow any responses to this entry through the RSS 2.0 (http://expressioniq.com/?feed=rss2&p=1951) feed. You can leave a response (http://expressioniq.com/?p=1951#respond), or trackback (http://expressioniq.com/wp-trackback.php?p=1951) from your own site.

---